The Original cover was installed with wires. These wires ran thru the seat cover which where hog ringed to the foam. These hog rings were secured to the foam by another wire that was embedded in the foam. Our aftermarket foam installs a little differently. Instead of wires, we just use spray adhesive to glue down the inserts to the foam. The foam has 2 different heights, so glue should only be applied to the lower areas of the new foam.
Be sure to apply the spray adhesive to both the cover and the foam, let it dry for a bit, you are looking for it to be tacky, and then place the cover onto the foam.
The rest of the cover installs just like the original, wrap the cover onto the backside of the wood frame and staple it.